תאריך ושעה
 



להצטרפות לרשימת התפוצה הכנס את כתובת הדואר האלקטרוני שלך:
 


מונה:

דף הבית >> ציוד לימודי מעבדתי ותהליכי >> תנורי וואקום
 


מוצעים תנורי וואקום מעבדתיים, תעשיתיים למגוון מטרות, וכוללים:        לייעוץ  דר' מאיר פישר 0544 236 802

דלת עם חלון זכוכית כפולה לצפייה מושלמת לתוך התנור.
אטימת הדלת בעזרת אטמי גומי סיליקוני.
פנים התנור עשוי מפלדת אל-חלד.
אפשרות להפעלה עם גזי מגן.
בקרת טמפרטורה מדוייקת.
תהליך חימום מהיר.

  

The newly developed vacuum drying oven: thanks to the technological achievement of the tank-heating field, we are able to innovatively solve the problem of the finding the best heat transmission process 

Usage description of the vacuum drying oven: This product is designed for dryness and heat sensitive material, decompose-prone and oxidation-prone material. It is able to infuse inert gases and also quickly dry up complex structured articles

Features of the vacuum drying oven
Rectangular working tank maximized working volume, precise computerized temperature control
Double deck steel glass that is anti-bullet structured enable observation
Tank door is adjustable in pressure. The wholly processed silicon rubber seal gasket providing a high vacuum condition
Stainless steel plate working chamber ensures the longevity of the product
Storage, heating, experiment and drying process are all carried out in a non-oxygen environment filled with inert gases in case of oxidation
Short heating time, 50% less time consumption than traditional way
Vacuum environment greatly reduces the boiling point of liquid which needs to be fighted off,so, a Vacuum Drying Oven can be applied in heat-sensitive substance easily
For some uneasy-dried samples, such as colloids, powder and other granules, Vacuum Drying Ovens can shorten their drying time
All kinds of machines with complicated and porous structure will without any residual stains after being washed by vacuum drying oven
Use safer - in a vacuum or inert conditions, it will make the explosion impossible when oxide meets high heat
Compared with air circulation relied on Drying Oven, the powder sample will not be blowed and moved by flowing air


Optional parts of the vacuum drying oven: 
Intelligent programmable temperature control device,.
 Vacuum pump (120L/min),  Tank, stand  Filter

 

Technical parameters of vacuum drying oven

 

Type FMA-6210 FMA-6090 FMA-6050 FMA-6020
Power voltage 220V  50Hz
Input power 2500W 1500W 1400W                                                          1200W 
Temperature scale 50~250℃
Temperature fluctuation ±1%
Vacuum rate < 133Pa
Core dimension 560×640×600 450×450×450 415×345×370 300×300×275
Overall dimension 720×820×1750 610×680×1460 710×560×550 590×490×450
Supporting board Three (independent temperature control) two (independent temperature control) two/three (6053) one/two (6022)
Working chamber material Stainless steel(1Gr18Ni9Ti) Cold rolling sheet(08F)   Stainless steel(1Gr18nI9tI)

 

 



 

 

פישר טכנולוגיות וסחר בינלאומי (1986)   יואב שחם 3ב, ת.ד. 1414, מזכרת בתיה 76804

Fisher TEC  Intl Traders (1986) , 3b Yoav-Shaham St, POB 1414, Mazkeret-Batia, Israel 76804 

טל'- Tel-972-8-9348455,    פקס - Fax-972-8-9348456,   


 fisherma@inter.net.il

0544236802 דר מאיר פישר

לייבסיטי - בניית אתרים